Combi-Lock Washers for SmartBolts

Heico Combi-Lock Washers M10 Stainless Steel

Conventional fasteners often rely on the physics of friction instead of tension to maintain clamp load e.g. nyloc nuts, metal lock nuts, safety-wire, thread adhesives etc. but this offers limited performance.

With HEICO-LOCK® the unique tension based design of the washer system provides superior resistance to constant vibration, high dynamic loads and thermal cycling.

The HEICO-LOCK® system consists of a pre-assembled pair of washers with inclined cams on the inside and radial teeth on the outside.   Tightening of the nut/bolt creates a ‘gripping’ action of the teeth thus seating the mating surfaces.

The angle of the cams (α) between the HEICO-LOCK® washers is greater than the thread pitch (β) of the bolt. This angle means the expansion in thickness of the HEICO-LOCK® washers is greater than the possible longitudinal movement of the bolt along the thread.

With HEICO-LOCK® any bolt loosening results in the internal cams separating and their movement across each other results in an increase in tension and clamp load. During removal, only the cam surfaces move, resulting in low off torque force.