Code
AL-026-48-AM-FB-PC
Description
20W WAGGY LED High Intensity Runway Guard Light
Airfield Lighting Systems WAGGY LED high intensity Runway Guard Light 230VAC model. There are two options either a spigot or low profile L shape frangible bracket to comply with IEC 61827. Section 4.2.2 Elevated Luminaires - The overall height of an elevated luminaire intended to be used within the runway or taxiway safety area shall not exceed 350mm above pavement except for heliports where the height limit shall be 250mm. In case of RGL, the height shall not exceed 650mm.
These heights could be increased with the approval of the competent aerodrome authority. We offer two models of the RGL, one as below with low profile frangible brackets.
Can also be supplied as a solar option, please ask for further details.
One of the installations required for prevention of runway incursions is the Runway Guard Lights (RGL), also referred to as “Wig-Wag”. These should under certain conditions be installed on every taxiway connected to the runway as the last resort to remind a flight crew that they must have a clearance to continue before entering an active runway.
The elevated Runway Guard Light WAGGY is the answer to these problems.
Based on a new generation of LEDs and a revolutionary design both in size and light output, WAGGY is a perfect choice, it also has a specific flashing pattern exhibiting crisp ON and OFF status.
Temperature Range |
-40° to +50° |
Degree of Protection |
IP65 |
Humidity |
0-100% |
Wind Speed |
Up to 480 Km/h |
Order Code
AL-079-48-AM-FB
Input Voltage
230V
Type
Elevated or Low Profile Model Available
Power
20W
Product Width/Depth (mm)
700
Product Height (mm)
400
Colour
Yellow
Light Source
48 LED's
Minimum Order Quantity
1