Single Switching Unit (SSU) Fail On, Plug and Socket on all Leads
Code
SSU/FON/L0.5S-CPS
Description
Single Switching Unit (SSU) Fail On, Plug and Socket on all Leads
Contact us to enquire about this product
Product Overview
Single Switching Unit (SSU) Fail On, Plug and Socket on all Leads
Airfield Lighting Systems single switching unit for switching individual lighting fittings. Widely used for stop-bar control. The ALS SSU is available in either Fail-On or Fail-Off versions. The ALS SSUs enables the suppression of any LED or incandescent lamp from 1W to 100W that uses a 6.6A supply down to 1A. The SSU is also available in the form of a combined switching transformer with both items cast in the same encapsulated unit.
Features & Benefits
- Encapsulated in a homogenous high quality polyurethane resin
- Uses 31% less energy than other switching devices when the lamps are suppressed
- Current ramping as standard, gives longer lamp life
- Interchangeable with any other manufacturers’ lamp suppression unit
- Available in Fail-On and Fail-Off versions
- 12hr minimum water testing prior to despatch
- Ambient temperature range -20°C to +55°C
- Resistant to acid and alkaline soils, oils, fuels and de-icing fluids
- Materials used are also termite and rodent proof
- IP rating equivalent to IP68
Technical Specification
- Switching signal voltages 12V to 72V DC – Half-wave control signals must not be used
- Switching signal current 2 mA at 48V DC
- Switching signal to transformer secondary isolation voltage of 2500V AC
- SSU Control signal cables 2 core, 2.5mm²
- Current to the lamps is ramped up and down more slowly than the regulator changes its firing angle (150ms)
- Maximum rms voltage of 33V when open circuit
Order Code
SSU/FON/L0.5S-CPS
Minimum Order Quantity
1
Type
Fail On
Connector
Plug & Socket on all Leads
